REFLECTIVE + GLOW-IN-THE-DARK
Violet/blue base, glow-in-the-dark blue, blue/violet aurora shimmer, pink/aqua sparkles, pink/aqua reflective glitter, & violet/blue/aqua iridescent flakies.
*This item is for pre-order and may take up to 4-6 weeks for fulfillment.
Sibling color to En Plein Air.
Application: Apply 2-3 coats. Recommend 1-2 layers of top coat for smooth coverage.
May dry in a semi-matte finish due to glitter and glow-in-the-dark pigments. Give bottle a good shake before use as glow-in-the-dark pigment may settle at the bottom.
Activate glow-in-the-dark by exposing to sunlight, light sources, or UV/LED light for 30-60 seconds. UV/LED light exposure will result in a stronger glow.
Note: Blue glow-in-the-dark pigment is more subtle than white, green, and aqua due to human eye sensitivity and chemical composition.
Store in a cool, dark, and dry location. Pigments may alter over time when exposed to heat and sunlight.
NOTES ON GLOW-IN-THE-DARK PIGMENTS:
Not all GID pigments glow with the same intensity & for the same length of time.
The intensity is based on the wavelength the color gives off.
Yellow, green, white, aqua: glow the brightest and longest
Red, dark orange, pink, blue, violet, purple: less bright and shorter glow time as they are on the ends of the visible color spectrum
Particle size of the pigment can also impact the glow. A finer pigment will result in a less grainy glow; however it may not glow as bright compared to a larger particle size. Would you rather have a smoother glow or a brighter glow? Use of other pigments in tandem, such as shimmers and glitters, can also make the glow look more grainy or speckled.
Light source used to “charge” GID pigments glow also impacts strength. Using UV/LED light will result in a stronger glow than incandescent lighting and sunlight, especially for colors on the end of the color spectrum.
Ingredients: Ethyl Acetate, Butyl Acetate, Nitrocellulose, Adipic Acid/Neopentyl, Glycol/Trimellitic, Isopropyl Alcohol, Acetyl Tributyl Citrate, Silica, N-butyl Alcohol, Benzophenone-3, D&C Violet #2, Red 6 Lake, Ultramarine Blue, Yellow 10, Titanium Dioxide, D&C Black #2, Polyester-3, Non-Phthalate Plasticizer, Yellow 115, Ferric Ammonium Ferrocyanide, FD&C Yellow 5 Aluminum Lake, Talc, Red 30, Tartrazine, Glow-in-the-Dark Pigment, Silica, Titanium Dioxide, Calcium Aluminum Borosilicate, Tin Oxide, Polyethylene Terephalate, Aluminum, Polyurethane 33, Ferric Ferrocyanide, Carmine
REFLECTIVE + GLOW-IN-THE-DARK
Violet/blue base, glow-in-the-dark blue, blue/violet aurora shimmer, pink/aqua sparkles, pink/aqua reflective glitter, & violet/blue/aqua iridescent flakies.
*This item is for pre-order and may take up to 4-6 weeks for fulfillment.
Sibling color to En Plein Air.
Application: Apply 2-3 coats. Recommend 1-2 layers of top coat for smooth coverage.
May dry in a semi-matte finish due to glitter and glow-in-the-dark pigments. Give bottle a good shake before use as glow-in-the-dark pigment may settle at the bottom.
Activate glow-in-the-dark by exposing to sunlight, light sources, or UV/LED light for 30-60 seconds. UV/LED light exposure will result in a stronger glow.
Note: Blue glow-in-the-dark pigment is more subtle than white, green, and aqua due to human eye sensitivity and chemical composition.
Store in a cool, dark, and dry location. Pigments may alter over time when exposed to heat and sunlight.
NOTES ON GLOW-IN-THE-DARK PIGMENTS:
Not all GID pigments glow with the same intensity & for the same length of time.
The intensity is based on the wavelength the color gives off.
Yellow, green, white, aqua: glow the brightest and longest
Red, dark orange, pink, blue, violet, purple: less bright and shorter glow time as they are on the ends of the visible color spectrum
Particle size of the pigment can also impact the glow. A finer pigment will result in a less grainy glow; however it may not glow as bright compared to a larger particle size. Would you rather have a smoother glow or a brighter glow? Use of other pigments in tandem, such as shimmers and glitters, can also make the glow look more grainy or speckled.
Light source used to “charge” GID pigments glow also impacts strength. Using UV/LED light will result in a stronger glow than incandescent lighting and sunlight, especially for colors on the end of the color spectrum.
Ingredients: Ethyl Acetate, Butyl Acetate, Nitrocellulose, Adipic Acid/Neopentyl, Glycol/Trimellitic, Isopropyl Alcohol, Acetyl Tributyl Citrate, Silica, N-butyl Alcohol, Benzophenone-3, D&C Violet #2, Red 6 Lake, Ultramarine Blue, Yellow 10, Titanium Dioxide, D&C Black #2, Polyester-3, Non-Phthalate Plasticizer, Yellow 115, Ferric Ammonium Ferrocyanide, FD&C Yellow 5 Aluminum Lake, Talc, Red 30, Tartrazine, Glow-in-the-Dark Pigment, Silica, Titanium Dioxide, Calcium Aluminum Borosilicate, Tin Oxide, Polyethylene Terephalate, Aluminum, Polyurethane 33, Ferric Ferrocyanide, Carmine
Image 1 of 29
Image 2 of 29
Image 3 of 29
Image 4 of 29
Image 5 of 29
Image 6 of 29
Image 7 of 29
Image 8 of 29
Image 9 of 29
Image 10 of 29
Image 11 of 29
Image 12 of 29
Image 13 of 29
Image 14 of 29
Image 15 of 29
Image 16 of 29
Image 17 of 29
Image 18 of 29
Image 19 of 29
Image 20 of 29
Image 21 of 29
Image 22 of 29
Image 23 of 29
Image 24 of 29
Image 25 of 29
Image 26 of 29
Image 27 of 29
Image 28 of 29
Image 29 of 29
